• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유

Choosing uPVC Replacement Window Handles

Many customers agree that replacement handles made of upvc are easy to install and feel great. But it's important to understand that the kind of handle you pick must be right for your window.

The key factor is the step height which refers to the gap beneath the nose of the handle to the base or frame. Other factors to consider are lockable styles and mechanisms.

Replacement parts

There is a variety of replacement upvc window handles available to buy. They come in a variety of colours and styles so there's sure to be something that will fit your windows. It's easy to make impulsive purchases especially when the handle fails, so it's best to take your time and check certain things prior to committing to purchasing a new one. The first thing to think about is what kind of upvc handle do you have now and what the difference between the types is. The table below lists the most commonly used handles so that you can select the best one to match your window.

Espag handles are the most common and are used on the majority of modern double glazing window replacement-glazed windows. They are typically attached to the frame using two screws that screw in from both above and below.

They have a spindle bar at the back, which can come in a variety of sizes, and this will determine how they work (either left or right handed). This is why it's essential to take a measurement of the handle you have to ensure you're ordering the correct replacement.

The arm is fixed to the frame using two bolts, just like the Espag handle. The arm has a lower projection, to ensure that it doesn't scratch your blinds. This is a great option for those who want the handle to blend in with your blinds and have windows made of upvc.

Cockspur handles are similar to Espag handles but they have a nose that closes over a wedge which sits on the frame of the window. This kind of handle is available on older wooden and upvc windows.

On casement windows the tilt and turn handles are operated by turning the handle or pressing the top of window. The window is opened from the inside and lets you to clean the outside without having to go out onto a ladder or climb over the fence. They are also a great alternative for those with limited mobility. They can be an excellent method to improve security and accessibility at home.

Tips and tips and

There are a variety of different types of uPVC window handles, and many people will have to replace them at some moment. If this happens, it's a good idea to know a few hints and tips to help the job be as smooth as it can.

The first step is check what type of handle you have at home. Depending on the type of handle and the locking mechanism, it might be necessary to replace the lock and handle. For instance, if the shoot bolts (espag) and roller cams are seizing or jammed, you will need to replace them as well as the handle itself.

Fortunately, the majority of uPVC handles follow industry standards and are very similar. This allows for a relatively simple process. First, you must remove the screw covers on the handles. These are usually pozidrive screws. Once the screws are removed, you will be able to take apart the handle.

When you have the handle broken from the handle, replacement window handle it's an ideal idea to take note of how much of the spindle protrudes from the base of the handle. This will allow you to determine the length of the spindle for the replacement handle. To do this, simply measure the amount of the square peg sticking out from the top of the handle, and use it as a reference.

This is especially true for inline uPVC handles for windows, since they are always straight and only open to the left or right. They will not work in the middle. It's a good idea in the event that you're not certain of the kind of handle you have at your home to borrow a handle and see how it functions.

You can also determine the handedness of a uPVC window by observing how the handle rotates when it is used. Handed handles will turn either clockwise or anti-clockwise. If you're not sure it's possible to have someone else open the window using the handle, and work out how it operates in that way.

Take a measurement of the spindle

It isn't easy to select the appropriate Replacement Window Handle handle for your window because not all handles have the same size. It is important to measure the spindle accurately when installing the new handle. This will ensure that the handle fits. There are several different types of uPVC window handles, and they operate in different ways so it is essential to know the type of handle you are using and the type of locking system you have.

The spindle of the espag handle extends out from the handle's rear and is connected to the lock gearbox inside the window frame. When you turn the handle it turns the lock inside the gearbox and opens the window. They are used on uPVC windows with casement. They can be locked using keys to increase security.

Cockspur handles feature an "nose" that closes over a wedge-shaped striker block on the frame. They are typically found on older double-glazed uPVC windows. They are also easy to use and can be locked using keys. These handles are a little more difficult to locate replacements for as they are not as common as the espagnolette handle.

If you have an open tilt and turn uPVC window, then you'll require a particular kind of uPVC replacement handle with a different locking mechanism. The handle can tilt the window and allow it to be rotated back and forth in order to fully open it. You must choose the handle with a spindle of at least 55mm in order to be able reach the window frame.

You can use the same method to take off and replace this kind of uPVC handle, however you'll need to be careful when unscrewing the old one. It may be necessary to open the window wider than usual to reach both screws that attach it to the frame. After you have installed your new uPVC handle and checked that it is in the right position, you are able to tighten the screw covers and test the lock to make sure it functions properly.

Fit the new handle

Once you have the correct handle replacement, it's going to be easy to screw it into place. This requires a screwdriver but might be easier using an electric one. When screwing in place it is crucial not to over tighten the screws as this could cause the handle to warp or crack.

The second step in fitting the new handle is to install the spindle. The spindle is the component that runs through the handle to operate the locking mechanism in the window. It is crucial that it fits correctly as it will ensure that the window can be shut and opened securely.

There are a variety of different kinds of uPVC window handles. These include:

Espagnolette Handles - these are handles that are inline and can be used on windows that tilt and turn to open the window.

Cranked Espagnolette Handles: These are similar to inline handles but have a curvaceous shape that can be useful for hard-to-reach windows.

Tilt and Turn Handles - These are used on tilt and turn windows to control the closing and opening mechanisms.

The majority of uPVC window frames are fitted with these. They are commonly called 'Bay Windows' in the UK.

If your uPVC window handle is broken it can be extremely frustrating. There is no need to replace the entire uPVC window because of a broken window handle. There are several easy steps that can be taken to repair or Replacement Window Handle replace a broken uPVC window handle.

You can repair your broken window handle swiftly by identifying the model and measuring the spindle. When working with windows or tools, it is important to put safety first. However it is a simple job. It can mean the difference between having a secure and secure home, or a window that can be easily opened. If you have any questions or would like to speak with a professional regarding replacing your window handle, call Bridgewater Glass. We have a team that is skilled and knowledgeable to assist you with any issue.